Let a few satisfied customers tell you about their experience with Precision Target Pistol Grips
Tom B writes -
Received the grips today and installed them. The short answer - simply amazing! A whole different feel, comfort, and a relaxed confidence has been bolstered by your grip. Dimensionally speaking around my hand - dead balls perfect. I'm quite surprised for a first run.
Received the grips today and installed them. The short answer - simply amazing! A whole different feel, comfort, and a relaxed confidence has been bolstered by your grip. Dimensionally speaking around my hand - dead balls perfect. I'm quite surprised for a first run.
Tom Gray writes - I sent a request to Andrew and he jumped at the chance to make grips he had never done before. It was a tough request: make the same grips I have on my Sig-Sauer p220 Dark Elite for my Avanti 747 & IZH46. Both sets of original grips had the thumb rest which i prefer not to use. I sent Andrew some pictures and the result was spot on.
The avanti frame did not allow for a perfect back strap angle, but Andrew did an excellent job working that out with great results. Fit was awesome, I only did some slight mods to make everything fit to my liking. I just emoved screws of original grips & slapped on the 3D Precision Target Grips-all lined up nicely.
Material was easy to work with & easy to add to with some 2 part JB-Weld steel stick
Grip material was easy to sand to my preference for fit & feel. Using the lines from 3D printing & sanding with some 100 grit the grip surface is perfect for indoor 10meter practice. Speed in receiving the 3D printed grips was very timely
Remember Precision Target Pistol Grips had never printed a set of p220 grips for these air pistols. Andrew kept in touch, followed up and responded all in very timely manner.
Oh, and let me not forget the customer service and willingness to replace & modify as needed very helpful & accomodating!! I am now enjoying the result of precision target grips' fine work. Again, awesome job copying the contour of the p220 grips to these air pistols.
Now whether I am target shooting in our basement 10m range with the 747 or IZH46 or out shooting the Sig-Sauer p220 or p229 or Volquartsen Scorpion: my grip is the same-no different grip to adjust to when going from pistol to pistol
.
Thanks Precision Target Pistol Grips!
Job Well Done,
Tom
The avanti frame did not allow for a perfect back strap angle, but Andrew did an excellent job working that out with great results. Fit was awesome, I only did some slight mods to make everything fit to my liking. I just emoved screws of original grips & slapped on the 3D Precision Target Grips-all lined up nicely.
Material was easy to work with & easy to add to with some 2 part JB-Weld steel stick
Grip material was easy to sand to my preference for fit & feel. Using the lines from 3D printing & sanding with some 100 grit the grip surface is perfect for indoor 10meter practice. Speed in receiving the 3D printed grips was very timely
Remember Precision Target Pistol Grips had never printed a set of p220 grips for these air pistols. Andrew kept in touch, followed up and responded all in very timely manner.
Oh, and let me not forget the customer service and willingness to replace & modify as needed very helpful & accomodating!! I am now enjoying the result of precision target grips' fine work. Again, awesome job copying the contour of the p220 grips to these air pistols.
Now whether I am target shooting in our basement 10m range with the 747 or IZH46 or out shooting the Sig-Sauer p220 or p229 or Volquartsen Scorpion: my grip is the same-no different grip to adjust to when going from pistol to pistol
.
Thanks Precision Target Pistol Grips!
Job Well Done,
Tom
This is Jake Perry with his silver medal from Camp Perry's 2016 National Matches, his Pardini and Precision Target Pistol custom grip. Jake writes after receiving his grip (and before winning with it at Camp Perry). "I love my new Pardini grips! I had to do a little filing to get the gun to fit just right but she's ready to go now. I'm finally going to be able to shoot tonight and I can't wait to see how I do. Hopefully you can get a few orders from my shooting buddies when I show it off."
|
Nick Bichelmeyer writes about his son's first target pistol grip...
Just recieved and installed the pistol grip onto my sons pistol. Fit together very nicely. My son really likes the grip, it fits his hand perfectly and he likes the shelf on the bottom of the grip, that was something the original grip did not have. He says that holding the gun is much more comfortable now. Thank You for your help and guidance with this and Thank You for the engraved initials Nicholas was excited to see them on HIS grip. Definitly looking forward to continuing working with you as Nicholas grows and progresses through the sport. Thank You again Andrew, Nick Bichelmeyer 
|
---------------------------------
And a special acknowledgement to Donna Missigman, the owner and artist of that beautiful Pardini at the top of the page, who was so happy with her new grip she just had to add her own work to it. |
